Uses of Class
stella.parameter.AbstractParameter

Packages that use AbstractParameter

stella.ccd
stella.jview
stella.parameter
stella.roof
stella.sensor
stella.telescope
stella.util

Uses of AbstractParameter in stella.ccd

Subclasses of AbstractParameter in stella.ccd

class	AbstractCCDParameter A intermittent class that bundels a common requirement of all ccd parameters.
class	AbstractCCDValue A base class for all non-abstract ccd-values.
class	CCDLn2Temp Returns the cold point temperature of the CCD.
class	CCDRefTemp Returns the reference temperature of the CCD.
class	CCDTemp Returns the actual temperature of the CCD.
class	HeadPressure Returns the head pressure of the camera.

Uses of AbstractParameter in stella.jview

Subclasses of AbstractParameter in stella.jview

class	JFrameParameter A special parameter used as a dirty trick to get a parameter display.
class	JSliderParameter A slider parameter is a Value or Trigger that is entered into the system by moving a slider in a window.

Fields in stella.jview declared as AbstractParameter

private AbstractParameter

JTargetTable.ParameterRenderer.formatter Only abstract parameters can do this.

Uses of AbstractParameter in stella.parameter

Subclasses of AbstractParameter in stella.parameter

class	AbstractCachedParameter An abstract base class providing the functionalibility of a parameter that can cache its value, if getting is too expensive to be commenced at any time.
class	AbstractDatabaseParameter An abstract implementation of a parameter that connects to a database.
class	AbstractDatabaseValue This Value retrieves values from a database.
class	AbstractFitsMomentsValue Provides basic facilities for target depending values that also need access to fits moments.
class	AbstractFitsParameter A class of values that deal with read-in fits files, where a (small) window is extracted to get some statistics.
class	AbstractFitsValue A class of values that deal with read-in fits files, where a (small) window is extracted to get some statistics.
class	AbstractRemoteParameter A skeleton implementation of a RemoteParameter.
class	AbstractRemoteSwitch An abstract implementation of a remote switch.
class	AbstractRemoteTrigger A skelleton implementation of a RemoteTrigger.
class	AbstractRemoteValue Abstract implementation of a Remote Parameter that acts locally as a value.
class	AbstractStatusRequestor An abstract base class providing the functionalibility of a StatusRequesting parameter.
class	AbstractSwitch An abstract implementation for a switch.
class	AbstractTargetParameter An abstract base class for some target depending parameters.
class	AbstractTargetValue An abstract base class for some target depending parameters.
class	AbstractTime
class	AbstractTrigger An intermediate class from an abstract parameter to a concrete trigger class.
class	AbstractValue An intermediate class from an abstract parameter to a concrete value class.
class	AcceleratedJd Represents the current time as julian date.
class	AcceleratedTime A general variable representing time.
class	AirmassTarget Represents the airmass to the actual target.
class	AlarmWatch An alarm watch acts like a stop watch, but additionally implements notification after a certain amount of time has been accumulated in the stop watch.
class	Altitude A Parameter representing the latitude of the Teide observatory.
class	AltTarget Represents the height of the actual target in degrees.
class	AltTelescope The current position of the telescope, altitude in degrees.
class	AltVelocity A class to calculate the velocity in altitude as a function of target coordinates and sidereal time according to
class	AzTarget Represents the azimuth of the actual target in degrees.
class	AzTelescope The current position of the telescope, altitude in degrees.
class	AzVelocity A class to calculate the velocity in altitude as a function of target coordinates and sidereal time, according to
class	BarycentricVelocity Computes baricentric velocity correction, based on FORTRAN-code at bvc
class	BVTarget A general variable representing the color index B-V of the actual object.
class	ClassicPointingModel A class representing a classical pointing model with normalized parameters.
class	ConstantOffset A class representing a contant offset in two telescope axes, azimuth and altitude.
class	CountDownTrigger A trigger that has a nominal state, set by initboolean.
class	CountDownWatch A count down acts more or less like a stop watch, but in the way that it is not counting up, but counting down.
class	CountingTrigger A trigger that counts the time whenever it is true.
class	DataValue The Parameter representation of a sensor reading.
class	DateFromJd Converts a julian date into a human-readable date, formatted in ISO style.
class	DateTime
class	DecApparent A general variable representing the ra of the actual object, precessed to the current equinox.
class	DecTarget A general variable representing the dec of the actual object.
class	DerotatorCenter A parameter that returns a two dimensional vector the is the right ascension and declination offset from the center of the CCD to the center of rotation of the derotator, in degrees.
class	DerotatorOffset A derotator offset is calculated such that Wifsip always points approximately to the ground, but at the same time keeping the CCD geometry fixed.
class	DeviceTrigger Device trigger are used to mirror the status of an external command server.
class	Distance A classs that calculates the distance between two points on the sphere.
static class	Distance.TargetDistance Target-depending version for distance of target to moon.
class	DitherParameter A dithering parameter supports exposure-number based dithering of an imaging instrument.
class	DiurnalVelocity Parameter that calculates the part of the radial velocity correction that is due to Earth's rotation.
class	EclipticObliquity A Value calculating the current obliquity of the ecliptic.
class	Efficiency This class takes a fits file, extracts a region around AbstractFitsValue.KEY_WINDOW, determines the total flux there and relates it to the incident flux of the star on top of the atmosphere.
class	ElapsedTime An elapsed time is a value linked to a trigger.
class	EnvironmentFocus A parameter that calculates an optimal setting for the telescope focus from a temperature parameter and the target height.
class	ErrorTrigger A trigger that gets true when a certain error event is sent to the SCS.
class	ExposureCount This parameter provides the running number of an exposure within a target.
class	ExposureRepeat A general variable representing the ra of the actual object.
class	ExposureSpan A general variable representing the ra of the actual object.
class	ExposureTimeLeft A general variable representing the the currently remaining exposure time.
class	ExtinctionCoefficient A Value that consits of a look-up table linking well-known filter names like 'B' for Johnson-B to the effective wavelength width, which is returned in nm.
class	FilterTarget A Value that consits of a look-up table linking well-known filter names like 'B' for Johnson-B to the effective wavelength width, which is returned in nm.
class	FilterWavelength A Value that consits of a look-up table linking well-known filter names like 'B' for Johnson-B to the effective wavelength width, which is returned in nm.
class	FilterWheelPosition Records the position of a Positioning driver, which is useful if this driver is a filter wheel.
class	FilterWidth A Value that consits of a look-up table linking well-known filter names like 'B' for Johnson-B to the effective wavelength width, which is returned in nm.
class	FitsMoments Fits moments calculates statistical moments of the ADU distribution.
class	FitsParameterStub The stub to a remote fits parameter.
class	FlatExposureTime We estimate the exposure time for a flat field to yield a good exposure level.
class	FlatGroup This parameter conducts the automatic selection of twilight sky flats.
class	FlatMatch This trigger is true only when the currently requested flat group, as defined by the FlatGroup parameter matches the flat group assigned to a sky flat field target.
class	FlatMaximumTime The maximum exposure time allowed for flats is a filter function, because it basically defines when too much star light is visible in the flat.
class	FlatPointing Provides the nominal best sky-flat pointing position, as reported in PASP 108, 944 (1996).
class	FlatQuality We estimate the quality of the currently accumulated flat fields.
class	FluxAdapter A parameter that utilizes incoming AdapterFwhm status messages to derive the reported star flux (in instrumental magnitudes) out of it.
class	FocusMeasure We measure the focus by maximizing a central moment of the image fits.
class	FocusPosition A simple parameter that reflects the currently attained focus position of the telescope.
class	FocusQuality This parameter returns the list of all exact focus determinations.
class	FocusStar A general variable representing the visual magnitude of the actual object.
class	FractionalExposureTime This parameter gives the fractional remaining exposure time.
class	FrameProvider A frame provider is a parameter that defines a certain rectangluar areas, normally depending on target picked and/or error received.
class	FwhmAdapter A parameter that utilizes incoming AdapterFwhm status messages to derive the reported star fwhm (in arcseconds) out of it.
class	HjdCorrection Represents the current heliocentric correction.
class	Horizon The horizon is a global constraint that deals with the partial vignetting of the field of view.
class	HostAddress Delivers a host name as an InetAddress object.
class	ImageRevolution This class calculates the image revolution in degrees per second.
class	ImageRotation This parameter gives the amount of image rotation in the focal plane.
class	ImageType A paramter that delivers the target name.
class	InferPark Tries to infer the parking state of the telescope by checking the telescope's power state and altitude.
class	IntegerId An ID describable as an integer.
class	Jd Represents the current time as julian date.
class	JFitsShow Displays the fits forwarded to it in a separate frame.
class	Latitude A Parameter representing the latitude of the Teide observatory.
class	LocalFitsParameter Class that deals with fits files originating from a FitsDriver.
class	Longitude A Parameter representing the longitude of the observatory.
class	MirrorTemperature A simple parameter that reflects the currently attained focus position of the telescope.
class	MissmatchTrigger A missmatch trigger is true, if the two values registered to it show an absolute displacement higher than MissmatchTrigger.KEY_MAXOFF.
class	MomentsTrigger A moment trigger changes its value depending on a fits moments list provided to it.
class	Moon A parameter representing the moon for a given time.
class	MoonAngle A class representing the current phase angle of the moon for the center of the moon.
class	MoonAzimuth A Value calculating the moon height.
class	MoonDec A class representing the current declination of the moon for the center of the earth.
class	MoonHeight A Value calculating the moon height.
class	MoonLight A model of the sky brightness caused by moon-light following the prescription of K.
class	MoonPhase A class representing the current phase of the moon as seen from the earth.
class	MoonRa A class representing the current right ascension of the moon for the center of the earth.
class	NasmithImageRevolution This parameter gives the amount of image rotation in the nashmith focal plane.
class	NasmithImageRotation This parameter gives the amount of image rotation in the nashmith focal plane.
class	NightClear This Value takes the registered time parameter and adds all time intervalls the weather was clear from the database.
class	NightLength A class giving the length of the actual night in milliseconds.
class	NightRemain A class giving the remaining length of the actual night in milliseconds.
class	ObservableList A parameter that is capable of cumulating a list of observable targets along with their highest-ever merit.
class	Observing A trigger that is true if the obersavtory is currently in the observing mode.
class	OneWireMultiSwitch A class providing access to a one-wire switches simultaneously.
class	OneWireSwitch A class providing access to a one-wire switch.
class	ParameterSkeleton A parameter that takes a non-remote parameter and exports it to the registry.
class	ParameterStub The stub to a remote parameter.
class	PilarParameter Parameters that are linked to a pilar3 telescope parameter.
class	PilarTrigger No true triggers (true/false) exist in Pilar, only values.
class	PilarValue Telescope parameters whose string representation can be parsed into a number
class	PointingModelOffset A class representing a contant offset in two telescope axes, azimuth and altitude.
class	PowerTelescope The current power state of the telescope, as parsed from a status event.
class	PropDecTarget A general variable representing the proper motion in dec of the actual object.
class	PropRaTarget A general variable representing the proper motion in ra, most likely in miliarcsec/yr, of the actual object.
class	RaApparent A general variable representing the ra of the actual object, precessed to the current equinox.
class	RankProvider A frame provider is a parameter that defines a certain rectangluar areas, normally depending on target picked and/or error received.
class	RaTarget A general variable representing the ra of the actual object.
class	RefractionModel A paramter that combines necessary environment data to allow the determination of the refraction.
class	RemoteSensorAverage Returns the average of a sensor.
class	RemoteSensorMaximum Returns the average of a sensor.
class	RemoteSensorShelf This value registers to a sensor that is a RmiDataCaster.
class	RemoteSensorStatistic This value registers to a sensor that is a RmiDataCaster.
class	RemoteSensorStub This class is a parameter stub, intended to bind to a remotely running sensor.
class	RemoteShelfAverage Returns the average of a sensor.
class	RemoteShelfMaximum Returns the average of a sensor.
class	RMagTarget A general variable representing the R magnitude of the actual object.
class	RollOverWatch A stopwatch counting time with the possibility of re-nulling at certain times.
class	RS485Switch A class providing access to a RS485-enabled switch.
class	SeasonWeather A trigger that mimics seasonal weather on the STELLA site.
class	SensorShelf Links averaging to a data sensor.
class	SensorStatistic A sensor statistic acts as a data listener, where every data event received is added to the statistic.
class	SensorValue A parameter that represents a sensor that is running locally on the same host.
class	SerialValue A class providing access to a RS485-enabled switch.
class	ServerPort Diverts a property into a port number.
class	SettableTime A general variable representing time.
class	ShelfStatistic This class hooks on to a shelf to generate minima/maxima or averages.
static class	ShelfStatistic.Average Useable class returning the average.
static class	ShelfStatistic.Maximum Useable class returning the average.
static class	ShelfStatistic.Minimum Useable class returning the average.
static class	ShelfStatistic.Test Test class.
class	ShutterTimes Wraps on a shutter and provides timing information.
class	SiderealGreenwich And yet another implementation of a sidereal time computation}, for the zero-meridian at Greenwich.
class	SiderealGreenwichApparent The apparent sidereal time in Greenwich.
class	SiderealTime And yet another implementation of a sidereal time computation.
class	SignalToNoise From a fits file, we extract a window and estimate the Signal-to-Noise from photon statistics.
class	SimpleEventTrigger An abstract implementation for an event trigger.
class	SimpleParameter A helper class providing a simple parameter.
class	SimpleRemoteSwitch A helper class providing a simulated switch that can be exported remotely.
class	SimpleRemoteTrigger A helper class providing a simple trigger.
class	SimpleRemoteValue A simple value with remote capabilites.
class	SimpleTrigger A helper class providing a simple trigger.
class	SimpleValue A helper class providing a simple parameter.
static class	SimpleValue.Exposure Simple value that implements the marjer interface to use it as an exposure time meter.
class	SnapshotParameter A snapshot parameter records the value of an other parameter at a certain time.
class	SnapshotValue An extension to a snapshot parameter, where the registered parameter must be a value.
class	SolAzimuth A Value calculating the solar zenith height.
class	SolDec A parameter giving the actual solar declination.
class	SolDistance A Value calculating the apparent solar distance in AU.
class	SolHeight A Value calculating the solar zenith height.
class	SolLambda A Value calculating the apparent solar ecliptical longitude.
class	SolOpposition A Value calculating the time out of a given solar ra.
class	SolRa A parameter giving the actual solar right ascension.
class	SolSink Gives the current speed of the sun-rise or sink, meaning the first derivative of the solar height with time.
class	SolZ A Value calculating the solar zenith distance.
class	StatisticValue A value that is reset at receiving a certain error-event, cumulates numbers with its set method and returns statistical values on get queris.
static class	StatisticValue.Average Useable class returning the average.
static class	StatisticValue.Maximum Useable class returning the average.
static class	StatisticValue.Median Useable class returning the median.
static class	StatisticValue.Minimum Useable class returning the average.
class	StopWatch A stop watch parameter counts elapsed time.
class	SumWatch A sum watch takes several StopWatches and returns their summed value on request.
class	SwitchSkeleton A trigger that takes a non-remote trigger and exports it to the registry.
class	SwitchStub The stub representation for a remote switch.
class	TargetCatalogName A paramter that delivers the target name in a SIMBAD-resolvable fashion.
class	TargetDistance A parameter that calculates the distance of a target to some given fixed point in the sky.
class	TargetFilterFunction A parameter that calculates its actual target value (like an exposure time) not only as a function of an other target depending parameter like the airmass, but also of the current filter selected, or, if useful, on any additional parameter.
class	TargetFunction A parameter that calculates its actual target value (like an exposure time) as a function of an other target depending parameter like the airmass.
class	TargetInstitution A parameter that assumes the user name of the current target.
class	TargetList A parameter that is capable of resolving a list of parsed targets in its TargetList.get() method.
class	TargetMerit A value symbolizing the current merit of the target.
class	TargetName A paramter that delivers the target name.
class	TargetSetup A general variable representing a constant in a setup of a target.
class	TargetType A paramter that delivers the target name.
class	TargetUser A paramter that delivers the target user name.
class	TauTarget Represents the hour angle of the actual target.
class	TelescopeError A class that uses incoming TelescopeStatus errors to deduce eventually occuring telescope errors.
class	Time A general variable representing time.
class	TrackTime A general variable representing the tracking time remaining for the actual object.
class	TrackVelocity A class to calculate the tracking velocity as the sum of AzVelocity and AltVelocity.
class	TriggerSkeleton A trigger that takes a non-remote trigger and exports it to the registry.
class	TriggerStub An extension to parameter stub.
class	Twilight A twilight parameter measures the time prior and after roof opening/closing.
class	Unique This parameter provides a unique identifier string that may be used in acquire/guide frames, scientific exposures or similar.
class	UserShare A parameter that represents the current time share of a user group.
class	ValueDifference Simple difference of two Values.
class	ValueFraction Simple fraction of two Values.
class	ValueProduct Simple product of two Values.
class	ValueStub The stub representation for a remote value.
class	ValueSum Simple adding of to Values.
class	VMagTarget A general variable representing the visual magnitude of the actual object.
class	WatchController A watch-controller is a super-class for instances that control a set of RollOverWatches.
class	WcsString A dummy variable to allow WCS header entries formatting ra or dec as a sexagesimal string.

Uses of AbstractParameter in stella.roof

Subclasses of AbstractParameter in stella.roof

class	Blinker A blinker is used to provide some sort of a warning signal before the STELLA roof starts moving.
class	LightSwitch A class providing access to a RS485-enabled light switch.
class	OneReadTrigger A trigger that reads the serial line on startup.
class	RoofTrigger A trigger that directly connects to a RoofOperating instance.
class	ShelterTrigger A trigger that directly connects to a Sheltering instance.
class	SwitchTrigger An event trigger that constanly monitors the status of the roof switches.

Uses of AbstractParameter in stella.sensor

Subclasses of AbstractParameter in stella.sensor

class	HumiditySwitch A switch that listens to a sensor and, based on the reading, switches an RS485-relay on and off.
class	WeatherRemainsBad The weather trigger exports the weather from a local WeatherSurveying instance to remote listeners.
class	WeatherTrigger The weather trigger exports the weather from a local WeatherSurveying instance to remote listeners.

Uses of AbstractParameter in stella.telescope

Subclasses of AbstractParameter in stella.telescope

class

CabinetSwitch A switch to turn the power in the switch cabinet of the telescope on and off.

Uses of AbstractParameter in stella.util

Subclasses of AbstractParameter in stella.util

class

SubTargets Takes a huge list of possible targets and applies a general filtering on them.